LOREX Technology Security Camera SHS 4QM Series User Manual

time  
tools  
Skills - easy  
Quad Surveillance SyStem  
with 4 ccd indoor/outdoor cameraS*  
Under 10 Minutes*  
Plug & Play connectors, On  
screen set up  
Hand Tools  
* Installation time may vary based  
on application and camera cabling  
B. Connecting the DIN Video Cable  
Getting Started  
Connect the DIN end of the Video Cable to the Quad Processor. Connect the RCA VIdeo cable  
to the TV, VCR or Monitor.  
The SHS System comes with the following components:  
• Quad Processor  
• 2 x Weatherproof Color Cameras with Stands  
• 2 x Weatherproof Color Day/Night IR Cameras with Stands  
• 4 x 60’ DIN Extension Cables  
• DIN Video Cable  
Night Vision  
Cameras  
Day Use  
Cameras  
• Remote Control  
QUAD PROCESSOR  
Connect the DIN Cable end  
to the Video Output port  
• Power Adapter  
TV / VCR / MONITOR  
Connect the Yellow RCA  
connector to the TV Video IN  
Port (yellow)  
Check your package to confirm that you have received the  
complete system, including all components shown above.  
SHS CABLE  
RCA to DIN Cable  
A. Connect Cameras  
Connectivity Diagram  
Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cables  
* IR illumination range up to 16 ft. (5M) under ideal conditions. Objects at or beyond this range may be partially or completely obscured,  
depending on the camera application. Picture changes from Color to B&W under low light conditions.  
* Note that the IR Night Vision Cameras have a black lens cover.  
TV / VCR / MONITOR  
POWER ADAPTER  
4 x CAMERAS  
Connect the female end of the supplied 60’  
extension’ cable to the camera.  
Connect the male end of the supplied 60’  
extension cable to an open DIN channel on  
the back of the Quad Processor. Continue  
connecting additional DIN cameras.  
1
2
NOTE: Confirm that the arrows  
on the DIN Camera Cable and the  
DIN Extension cable are aligned  
when connecting the cable. If the  
pins in the DIN Cable are bent, the  
Camera will NOT function.  
4 x 60’ EXTENSION CABLES  
NOTE: The arrow on  
the DIN Connector  
Connector should  
be facing up when  
connecting it to the  
Quad Processor.  
QUAD PROCESSOR  
DIN CABLE  
SHS-4QM SERIES Quick Set-Up Guide R1  
 

LifeCore Fitness Home Gym 1000Z User Manual
Logitech Home Theater System MKZ260 User Manual
Mackie Speaker SR1530Z User Manual
Magellan Universal Remote MG REM1 User Manual
Makita Impact Driver 6980FDWAE User Manual
Mamp;S Systems Intercom System DMC3 4 User Manual
Marshall electronic Computer Monitor V LCD70P HDA User Manual
Maytag Clothes Dryer W10184553C User Manual
Mellerware Toaster 24408 User Manual
Mellerware Toaster 24820750W User Manual