La Crosse Technology Universal Remote RS 204U CS User Manual

To turn on/off all controlled remote outlets for that remote,  
press the “master” key, ON or OFF.  
To turn on/off the remote outlet without the remote control,  
briefly press the button on the remote outlet. LED will be  
on when remote outlet is on.  
Remote Control Outlet System, RS-204U-CS  
Safety Precautions:  
The remote outlets are not rated for any outdoor use.  
The remote outlet is designed for US-type plugs, 120V  
rated.  
The remote outlets must be plugged only into outlets that  
are properly wired and grounded.  
Do not use at the end of an extension cord  
Do not expose remote outlet or remote control to water.  
Allow air to circulate around remote outlet as it may warm  
up when in use.  
Remote outlet  
Remote control  
Do not use in an application where a loss or gain of power  
is critical. The remote outlet may turn on or off at any time  
due to uncontrollable interference.  
As with all electrical devices, keep away from children.  
Not for medical purposes.  
Set-Up Instructions:  
1) Install 2 AAA Alkaline batteries into remote control.  
Press four numbers to set security code (for example  
“1-1-1-1”).  
2) Plug remote outlets into AC outlet. Press the button  
once.  
It is advised that the remote outlet be removed from outlet  
when not in use.  
Specifications:  
3) Press the button on the remote control that you wish  
to use to control that outlet.  
Model:  
set RS-204 (one remote, two outlets)  
included  
included  
Operating Voltage: 120V  
Operating Frequency: 60 Hz  
Maximum Current: 30 Amps  
RS-220 (remote outlets)  
RS-210 (remote control with ten buttons)  
Details on Set-Up:  
When batteries are first inserted into the remote  
control, the LED light will blink steadily until a code is  
entered. When entering the code, pause briefly  
between each button press to be sure it is entered in  
as desired.  
Maximum Power: 3600 Watts  
Operating Temperature: 32°F to 122°F  
Transmission Frequency: 433 MHz  
Transmission Distance: 80 feet, optimal conditions  
Once the remote outlet is plugged in, the LED will  
blink steadily until a button on the remote control is  
pressed.  
To set up additional outlets on the same remote,  
follow steps 2 and three.  
To set up additional remote controls, simply install  
batteries and set to the same code.  
If the remote outlet is unplugged, you will need to  
follow step 2 and 3 again.  
To set a new remote control button to a remote outlet  
without unplugging, press and hold the button on the  
outlet for about three seconds (LED will flash). Follow  
step 3 above.  
Troubleshooting  
Problem:  
Solutions:  
Remote control does not operate remote outlets.  
Move closer to remote outlet  
Re-program remote outlet  
Replace batteries (and re-program)  
Warranty  
La Crosse Technology provides a 1-year warranty on this  
Remote Control Outlet System  
For warranty work, technical support, or information contact:  
Options on setting up  
One remote control can control multiple remote outlets.  
When setting up each remote outlet, simply use the same  
remote and same number to control. For example, one  
remote control, code set to “1-2-3-4”, can be set to control  
ten different holiday lights by pressing key number “1”.  
Multiple remote controls can control the same remote  
outlet(s). Simply program additional remotes to the same  
code as the first. For example four remote controls can be  
placed in each corner of a large room. All of them are  
coded “2-2-2-2”. Thus, pressing key number “2” will control  
all outlets assigned to that code+number.  
La Crosse Technology  
2809 Losey Blvd. S.  
La Crosse, WI 54601  
Phone: 608.782.1610  
Fax: 608.796.1020  
e-mail:  
(warranty work)  
Each remote control has four numbered keys. Four  
separate systems can be operated on each number. For  
example key number 1 controls the holiday lights on the  
tree, key number 2 controls the main floor lamp, key  
number 3 controls the electric heater, and key number 4  
controls the radio.  
(information on other products)  
web:  
Operation:  
To turn on the remote outlet (and thus any device plugged  
in to it), press the corresponding ON key (left side of  
remote control).  
To turn off the remote outlet press the corresponding OFF  
key (right side of remote control).  
 

Lennox International Inc Boiler GSB8 E User Manual
Linear Satellite Radio D 22C User Manual
Logitech Car Speaker X 210 User Manual
Magnadyne MP3 Docking Station MV IPAD2 User Manual
Makita Saw 5201NA User Manual
Maxtor Computer Drive 96147H6 User Manual
Maytag Clothes Dryer MEDE200XW User Manual
McCulloch Brush Cutter B40B Elite User Manual
McCulloch Trimmer 964814301 User Manual
Melissa Styling Iron 635 081 User Manual