Laser Switch PW USBACDC User Manual

PW-USBACDC  
User Manual  
Dual Ports  
USB CHARGER  
Please read carefully before use  
For technial support please visit  
Address: Unit 1, 6-8 Byfield St, North Ryde, NSW 2113 AUSTRALIA  
PW-USBACDC User Manual  
TECHNICAL SPECIFICATIONS  
COMPONENTS IN THE BOX  
> AC input: 100VAC~240V AC 50/60Hz  
> DC input: 12VDC~24VDC  
AC plug  
Australia / New Zealand 240v AC plug  
> Rated output: 5V DC (standard)  
> USB 1 and 2 ports: 0.5A max current  
> SIZE:18X18X5.5( L X W X H )  
> WEIGHT:260g  
Charger body  
100v - 240v transformer (self switching)  
12v DC Car (Cigarette socket) adaptor  
DC plug  
TROUBLESHOOTING  
USB connectors (x 2)  
Twin USB ports for charging  
> Voltage of device does not correspond with that of USB adapter (5v; 0.5A per  
device)  
Refer to the user manual that came with your device.  
> Improper connection between your device and the USB adapter.  
Make sure that the USB cable has the correct plug and is properly inserted into the  
device and the USB adapter.  
FEATURES  
> Charge almost any 5V USB device such as iPod ™, digital cameras, MP3/ 4 players or  
mobile phones that charge using a USB cable.  
> Simply plug into any wall (240v) or car (12vDC) socket and start charging.  
> Convenient slimline design.  
> Device is not charging  
Some products require a PC or dedicated verification signal for battery charge &  
may need a PC to charge.  
> Two USB sockets for increased versatility  
> Can not charge with car kit plug in the car  
IMPORTANT SAFETY INSTRUCTIONS  
> Read and observe all warnings on the USB charger and in this user manual .  
> Devices connected to the USB charger should not exceed 5.3Volts  
> Do not use the USB charger in the moist places or close to water.  
> Safe operating environment: 0 to 45 degrees Celsius  
Check the in built fuse in the DC plug and replace if necessary / check ignition on or  
vehicle fuse.  
WARRANTY  
> 1 year limited warranty  
OPERATION  
> Warranty does not cover owner’s negligence, accidental damage, misuse, normal  
wear and tear  
> Select either AC (100-240VAC) plug or DC (12-14vDC) plug to be used  
> Connect the USB device(s) to one or both of the USB output terminals  
> Charging will commence immediately (no switches required)  
1
2
 

Lead Data Telephone BVP 8882 SIP User Manual
Liebert Welding System gxt2u User Manual
Liebherr Beverage Dispenser EWTN User Manual
Magma DVD Recorder MDR 24 96 User Manual
Makita Cordless Saw LS1030 User Manual
Marantz Computer Monitor PD6001 User Manual
Marantz Home Theater System SR9600 User Manual
Marantz Projector VP 11S1 User Manual
Metz Camcorder 34 AF 3 C User Manual
Middleby Marshall Oven PS200VL User Manual