Lytecaster® Performance Recessed CFL Downlighting 1101FEL
Page 1 of 1
6 ¾" Aperture, 1 Light, Compact Fluorescent, Non-IC, Hi Lumen, Emergency, Frame-In Kit
8
7
9
5
3
9
13 1/8"
9"
7 3/4"
11 7/8"
12 15/16" Min
24 1/8" Max
For O.A. Height See
Trim Specification
6 3/4" Frame
Aperture
6 15/16" Ceiling
Cutout
1
6
2
Complete Fixture consists of Frame-In Kit and Reflector Trim. Select each separately.
UniFrame™ Compact Fluorescent Performance Series Reflector Trims
UniFrame™
Frame-In Kit
1101F2642UEL
Vertical Open
Horizontal Open Horizontal Wet Location Lensed
1101CLIE
1101HCLIE
1101HCDIE
1101HCLCIE (Clear Lens)
1101HCDFIE (Fresnel Lens)
26w Quad/Triple, GX24q-3 Base 1101CDIE
120v – 0.33amp max
277v – 0.14amp max
32w Triple, GX24q-3 Base
120v – 0.40amp max
277v – 0.17amp max
Universal Series Reflector Trims
Cone
1113IE
1113CDIE
1113WHIE
42w Triple, GX24q-4 Base
120v – 0.53amp max
277v – 0.23amp max
Features
Average Lumen Output with Battery Pack
1. Mounting Frame: .036" (#20ga.) Galvanized Steel. Accommodates all
ceilings up to 1-1/2" thick.
Lamp
Lumen Output (1 Lamp)
26W CF Quad 4-Pin
32W CF Quad 4-Pin
42W CF Quad 4-Pin
725*
1050*
1300*
2. Trim Clips: “Push In / Twist Out” Stainless Steel clips hold reflector flush
to ceiling.
3. Junction Box: 2" x 4" x 3-1/2" (22cu.in.) .032" (#22ga.) galvanized steel.
UL Listed for maximum of 8 (#12ga.) through branch circuit conductors.
4. UniFrame™ Mounting System – Grid Ceiling: Tool free mounting in
grid ceilings. .036" (20ga.) Galvanized Steel interlocking slide bars adjust
to 24-1/8" long accommodating 24" O.C. Ceiling Grid. Adjustable speed
clamps for positive attachment to grid ceiling systems.
* Manufacturers Specifications
Labels: cULus Listed.
Accessories: 1967A Extra Thick Ceiling Adapter (up to 2" thk)
5. UniFrame™ Mounting System – Wood Joist Ceiling: Integral nailing
tabs, alignment guides, fastener holes and bendable strapping guides for
wood joist installation. Galvanized Steel interlocking slide bars adjust
from 12-15/16" to 24-1/8" long to accommodate 16" and 24" O.C. joist
spacing, with or without strapping.
6. Ballast: 120V – 277V UL Listed Electronic Ballast, end of lamp life protec-
tion, class “P” thermally protected, class “A” sound rating.
7. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18
AWM leads to ballast.
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
8. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to
reflector trim by spring clip for precise optic alignment.
9. Emergency Battery: High lumen output. 90 minute battery backup,
complete with integrated test switch.
Lightolier a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • A1107
|