LBB 4106/00D Extension Power Supply
Specify Part
Number
LBB 4106/00D
The Extension Power Supply unit is used
in combination with a CCU to supply
power to a maximum of 180 additional
units. The unit can be installed at any
convenient point in the system cabling
due to its built-in trunk-line splitter. It is
connected using loop-through
cabling. The unit switches on automatically when the CCU is switched on. All outputs are protected
against short circuit. It can be used freestanding on a table-top or mounted in a 19 in. rack.
Extension Power Supply Features
• Powers up to 180 additional contribution units (with PCF of 1)
• Remote mains on/off
• Easy connection to DCN
Specifications
Free standing on a table-top or mounted in a 19” rack unit (requires 2U, fi
width).
Mounting
3.93 x 8.66 x 12.12 in. (100 x 220 x 308 m), depth including handles 13.70 in.
Dimensions (H x W x D)
(348 mm).
Weight
18.26 lbs. (8.3 kg)
Color
Cabinet - light gray, Handles - dark gray
Power consumption
factor (PCF)
1
Listen Technologies Corporation
8535 South 700 West, Suite A
Sandy, UT 84070-2515 U.S.A.
Phone: 1.801.233.8992 or 1.800.330.0891
Fax: 1.801.233.8995
Don't miss a single sound.
Email: [email protected]
updated 01.11.05
Listen® and the Listen logo are registered trademarks of Listen Technologies Corporation
|