Marshall electronic Computer Monitor V R151DP AFHD User Manual

Marshall Electronics  
V-R151DP-AFSD • V-R151DP-AFHD  
SD/HD Video LCD Monitor  
Operating Instructions  
 
Product Overview  
The V-R151DP-AFSD/AFHD is a 15” SD/HD video LCD monitor, featuring our completely digital TFT-MegaPixelactive  
matrix LCD system. Occupying only 6 RU and only 1.77” deep, this monitor is an ideal lightweight replacement for CRTs  
used in all broadcast and professional video applications. Emulation of SMPTE-C/EBU color and adjustable color  
temperature enable the most precise color representation possible. Our proprietary digital signal processing features 10-  
bit A/D conversion of all analog signals, with 4X over-sampling and 5-line super-adaptive 2D comb filtering of composite  
signals. De-interlacing is performed using our HyperProcessalgorithm with motion adaptive interpolation. Both the V-  
R151DP-AFSD and V-R151DP-AFHD feature multi-format compatibility, accommodating virtually all video formats  
including NTSC/PAL, 480i/p, 720p, and 1080i/p formats. VGA and DVI inputs accept VESA standards allowing the display  
to be used as a computer monitor. The V-R151DP-AFHD adds HDSDI functionality, accepting 720p and 1080i/p formats.  
Advanced features include aspect ratio settings, a variety of screen markers, underscan mode, blue-only mode,  
monochrome mode, H/V delay, and Pixel-to-Pixelmode.  
Features  
High-Resolution 15” Panel  
The V-R151DP-AFSD/AFHD features an all-digital TFT-MegaPixelactive matrix LCD system with 2.4 million pixels.  
The LCD panel features a brightness of 500 cd/m2, 450:1 contrast ratio, and a 150° all-around viewing angle making  
the display ideal in a variety of environments and lighting conditions.  
Multi-Format Compatibility  
With a variety of analog and digital inputs, the V-R151DP-AFSD/AFHD accommodates virtually all video formats. Input  
types include Composite Video, S-Video, YPbPr, SDI, VGA, and DVI with HDCP. Accepted formats include  
NTSC/PAL, 480i/p, 576i/p, 720p, 1035i, and 1080i/p standards, as well as VESA PC formats through SXGA (1280 x  
1024). (HDSDI formats are available only on the V-R151DP-AFHD).  
End-to-End Digital Signal Processing  
Analog signals are digitized using an advanced 10-bit process with 4x over-sampling, 5-line super-adaptive 2D comb  
filtering, and exacting color space conversion. Video is scaled to fit on the screen in the highest possible resolution  
using a state-of-the-art LSI that incorporates precision gamma correction and our HyperProcessmotion adaptive  
interpolation for interlaced images.  
ColorMatchConversion with Color Temperature Adjustment  
Emulation of SMPTE-C/EBU color space allows the V-R151DP-AFSD/AFHD to replace any broadcast CRT monitor.  
Settings include D55, D65 and D95. Bias and Gain adjustment for each color enables precise color matching and white  
balance.  
Advanced Features  
Aspect ratio settings, underscan mode, blue-only mode, monochrome mode, and H/V delay are a few of the advanced  
features making the V-R151DP-AFSD/AFHD at home in any broadcast environment. Pixel-to-Pixelmode also allows  
native display of any incoming image format.  
Flexible Screen Markers  
A variety of screen markers in both 4:3 and 16:9 modes allow accurate monitoring of the different aspect ratios used in  
broadcast environments.  
User-Assigned Function Buttons  
Two user-assignable function buttons on the front-panel allow quick access to numerous settings and features  
including aspect ratio, screen markers, monochrome mode, color temperature, delay mode, and more.  
3
 
Installation and Initial Setup  
Unpacking  
Carefully unpack the V-R151DP-AFSD/AFHD monitor and verify that the following items are included:  
• V-R151DP-AFSD/AFHD Monitor with Attached Rack Ears  
• V-PS12-5V-1 Power Supply with Conxall 2-Pin Twist-Lock Connector  
• Operating Instructions  
Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage,  
immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States,  
call +1 (310) 333-0606.  
Installation  
The V-R151DP-AFSD/AFHD monitor is shipped with pre-installed removable rack ears, allowing the monitor to be  
installed in an EIA standard 19-inch rack (occupying 6 RU). When installed in a rack, the unit can be rotated up to 360°  
to achieve the desired viewing angle.  
Alternately, the V-R151DP-AFSD/AFHD can be configured as a desktop monitor with an optional table top stand  
(Marshall Part No. VP-0149-SF-A).  
A VESA standard 75mm hole pattern also allows custom mounting installations.  
Connections and Power-On  
Plug the V-PS12-5V-1 power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the 2-pin twist-lock  
connector to the back of the monitor. Please note that 12-17VDC can be also supplied directly to the monitor from a  
variety of sources. The monitor will draw approximately 3 Amps at 12 Volts in operation.  
Connect the required cables for video signal input and output. (Power must be applied to the V-R151DP- AFSD/AFHD  
for the active loop-though outputs to be activated.) All BNC connectors are rated at 75Ω.  
Turn on the unit by pressing the power button located on the front panel. Select a video input by pressing the  
corresponding input select button.  
4
 
Front Panel Features  
1
Power Button  
Turn the monitor on by pressing the power button.  
In the OFF state, the LED will shine brightly. The  
LED will dim when the monitor is turned on.  
1
2 Input Select Buttons  
Use the input select buttons to select the input to be  
displayed:  
Video  
S-Video  
YPbPr (SD/HD)  
VGA  
2
DVI  
SDI (HD on V-R151DP-AFHD)  
Each input automatically detects the applicable  
formats (See Compatible Input Formats – Page 7).  
On-Screen Menu Navigation Buttons  
3
Use the Menu, , , and Select buttons to display  
and navigate the on-screen menu (See Main Menu  
and Navigation – Page 8).  
4
3
4
User-Definable Function Buttons  
Two user-definable function buttons can be used for  
direct access to various settings. Functions are  
assigned using the on-screen menu (See User-  
Definable Function Buttons – Page 14).  
5
Image Adjustment Knobs  
5
Use the image adjustment knobs to adjust the  
following settings. Pressing each knob will display  
the current status of the corresponding control:  
Brightness (0-64)  
Color (0-64)  
Tint (0-64) [NTSC Only]  
Contrast (0-64)  
Right Front Panel  
Tally Lights  
6
Three tally LEDs (green, red, and yellow) are  
provided as general purpose indicators. Each LED  
can be individually controlled, providing multiple  
indications. Tally LEDs are controlled via the HD-15  
connector on the rear panel (See Tally Interface –  
Page 6).  
6
Top Front Panel  
5
 
Rear Panel Features  
1
4
3
2
Rear Panel  
Power Input  
Tally Interface  
1
3
Connect the 12VDC input to the Conxall 2-pin twist-lock  
power input connector. Power can be supplied from the  
included power supply, or from a variety of DC sources  
supplying at least 3 Amps at 12 Volts.  
Each tally light is activated via the HD-15 connector by  
connecting the corresponding pin to ground. A variety of  
external devices can be used to perform the contact  
closure. No additional power should be supplied to the  
HD-15 port.  
IMPORTANT: If using a power source other than the  
included power supply, be sure that the polarity of the  
DC input is correct:  
Tally Interface: HD-15 Pinout  
Pin No.  
1
2
Signal  
Green  
Red  
Pin 1: +12VDC  
Pin 2: GND  
3
4
5
6
Yellow  
Ground  
Ground  
N/C  
7
N/C  
8
N/C  
9
N/C  
N/C  
N/C  
N/C  
N/C  
Ground  
Ground  
Signal Input/Output  
2
10  
11  
12  
13  
14  
15  
Connections:  
Composite Video Input/Output (BNC)  
S-Video Input/Output (4-Pin Mini-DIN)  
YPBPR Input/Output (BNC x 3)  
SDI Input/Output (BNC)  
VGA (HD-15)  
DVI (29-Pin connector, DVI-D signals only)  
Example: To activate the red tally light, connect pin 2 to  
pin 4, 5, 14, or 15.  
Mounting Holes  
4
All outputs are active and require the monitor to be  
powered.  
A VESA-standard 75 mm hole pattern is provided to  
accommodate a variety of custom mounting options.  
6
 
Compatible Input Formats  
Format  
Composite  
S-Video  
YPbPr  
SDI  
VGA  
DVI-D  
NTSC  
PAL  
480i / 59.94  
576i / 50  
485p / 59.94  
576p / 50  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
*  
1035i / 60  
1035i / 59.94  
1080i / 60  
1080i / 59.95  
1080i / 50  
1080psF / 24  
1080psF / 23.98  
1080p / 30  
1080p / 29.97  
1080p / 25  
720p / 60  
720p / 59.94  
720p / 50  
720p / 30  
720p / 29.97  
720p / 25  
640 x 480 @ 60Hz  
640 x 480 @ 75Hz  
640 x 480 @ 85Hz  
800 x 600 @ 60Hz  
800 x 600 @ 75Hz  
800 x 600 @ 85Hz  
1024 x 768 @ 60Hz  
1024 x 768 @ 75Hz  
1024 x 768 @ 85Hz  
1280 x 1024 @ 60Hz  
* V-R151DP-AFHD Only  
7
 
On-Screen Menu  
STRUCTURE OVERVIEW  
OFF, 13:9, 14:9, 4:3, 2.35:1,  
1.85:1, 95%, 93%, 90%,  
88%, 80%  
MARKER 16:9  
MARKER 4:3  
MARKER SETUP  
OFF, 95%, 93%, 90%, 88%,  
80%  
MARKER BACKGROUND  
CENTER MARKER  
COLOR TEMP  
OFF, HALF, BLACK  
OFF, ON  
D55, D65, D93  
RED (0-100)  
GREEN (0-100)  
BLUE (0-100)  
RED (0-100)  
GREEN (0-100)  
BLUE (0-100)  
OFF, ON  
ADJ COLOR BIAS  
ADJ COLOR GAIN  
VIDEO CONFIG  
MONO  
BLUE ONLY  
PIXEL TO PIXEL  
ASPECT RATIO  
SCAN  
OFF, ON  
MAIN  
OFF, ON  
4:3, 16:9  
NORMAL, UNDER  
OFF, H/V, V, H  
OFF, ON  
DELAY  
SMPTE BAR  
DELAY, RATIO, BACK,  
CENTER, MARKER, MONO,  
CTEMP, PTP  
FUNCTION 1  
DELAY, RATIO, BACK,  
CENTER, MARKER, MONO,  
CTEMP, PTP  
FUNCTION 2  
SYSTEM CONFIG  
STATUS DISPLAY  
LOAD CONFIG  
OFF, ON  
USR1, USR2, USR3, USR4,  
USR5, USR6, MFG  
USR1, USR2, USR3, USR4,  
USR5, USR6  
SAVE CONFIG  
MAIN MENU AND NAVIGATION  
Access the main menu by pushing and holding the MENU button on the front panel of the monitor until the main menu  
appears (approximately 1-2 seconds).  
Step through menu items using the and buttons.  
Choose a menu item by pressing SELECT.  
Rotate through options using the and buttons.  
Choose a setting by pressing SELECT.  
Return to the previous menu by pressing MENU.  
Exit the main menu by pressing MENU. The menu will automatically  
time out after 5 seconds. After exiting the menu, wait 1-2 seconds  
before displaying the menu again.  
Main Menu  
8
 
On-Screen Menu (continued)  
MARKER SETUP SUBMENU  
Marker Setup Submenu  
16:9 Markers  
Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the  
aspect ratio is set to 4:3, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.  
• OFF (No Marker)  
• 13:9 Aspect Ratio  
• 14:9 Aspect Ratio  
• 4:3 Aspect Ratio  
• 2.35:1 Aspect Ratio  
• 1.85:1 Aspect Ratio  
• 95% Safe Area  
• 93% Safe Area  
• 90% Safe Area  
• 88% Safe Area  
• 80% Safe Area  
16:9 Marker Examples:  
OFF (No Marker)  
90% Safe Area  
2.35:1 Aspect Ratio  
4:3 Aspect Ratio Marker  
9
 
On-Screen Menu (continued)  
MARKER SETUP SUBMENU (continued)  
4:3 Markers  
Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the  
aspect ratio is set to 16:9, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.  
• OFF (No Marker)  
• 95% Safe Area  
• 93% Safe Area  
• 90% Safe Area  
• 88% Safe Area  
• 80% Safe Area  
4:3 Marker Examples:  
OFF (No Marker)  
90% Safe Area  
Marker Background  
Use this setting to choose how selected markers are displayed on the screen:  
• OFF  
• Half-tone Image area beyond the marker is shown at 50% intensity.  
• Black Image area beyond the marker is shown at 0% intensity (black).  
The marker is superimposed on the complete image.  
Example (80% Marker in 4:3 Mode):  
Background OFF  
Half-tone Background  
Black Background  
Center Marker  
Use this setting to display a center marker on the screen. This feature is not available when H/V delay is on.  
Center Marker  
10  
 
On-Screen Menu (continued)  
VIDEO CONFIGURATION SUBMENU  
Video Configuration Submenu  
Color Temperature Presets  
Use this setting to choose one of three color temperature presets:  
• D55 (5500K)  
• D65 (6500K)  
• D93 (9300K)  
• USER (Adjustable Color Bias and Gain)  
Adjusting Color Bias  
Color Bias Menu  
Use this submenu to adjust bias of the color response. Adjust the bias for each color to alter the white balance of the  
image. The Color Temperature preset will automatically switch to USER when Color Bias settings are adjusted. It is  
normal for color bias adjustments to be very subtle.  
Adjusting Color Gain  
Color Gain Menu  
Use this submenu to adjust gain of the color response. The Color Temperature preset will automatically switch to  
USER when Color Gain settings are adjusted.  
11  
 
On-Screen Menu (continued)  
VIDEO CONFIGURATION SUBMENU (continued)  
Monochrome Mode  
Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale  
picture.  
Blue-Only Mode  
Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching  
off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following  
procedure:  
1.  
2.  
3.  
4.  
Allow the monitor to warm up for at least 5-10 minutes.  
Display SMPTE split-field color bars on the monitor using the internal generator or an external source.  
Enable Monochrome mode.  
Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the Brightness knob until there is  
no visible difference between the super black and black bars, but the gray bar is still visible.  
5.  
6.  
7.  
8.  
Adjust the Contrast knob until an even grayscale appears along the top bars.  
Disable Monochrome mode.  
Enable Blue-Only mode and adjust the Color knob so that the outermost bars (white and blue) appear to match in brightness.  
Composite/S-Video NTSC only: Adjust the Tint knob until the third bar from the left (cyan) and the third bar from the right (magenta) appear to  
match in brightness.  
9.  
Disable Blue-Only mode.  
Pixel-to-PixelMode  
Use this setting to enable Pixel-to-Pixelmode.  
This mode bypasses the monitor’s internal scaling function and displays incoming images in their native resolution and  
aspect ratio, with a one-to-one mapping:  
For incoming formats smaller than the native resolution of the LCD panel (1024 x 768), the image will be  
displayed in the center of the screen using only the necessary LCD pixels. For example, NTSC or PAL images will  
occupy exactly 720 x 486 or 720 x 576 pixels respectively. The surrounding pixels will be black.  
For incoming formats exceeding 1024 x 768 pixels, only the center 1024 x 768 of the incoming image will  
displayed occupying the whole screen, with the remainder of the picture cropped. For example, 1080 and 720  
formats will both be cropped to 1024 x 768 and displayed full-screen.  
Note: Pixel-to-Pixelmode will utilize the entire screen (1024 x 768) regardless of the aspect ratio setting. Pixel-to-  
Pixelmode is not available when using the VGA or DVI inputs.  
12  
 
On-Screen Menu (continued)  
VIDEO CONFIGURATION SUBMENU (continued)  
Aspect Ratio Settings  
Use to switch between 4:3 and 16:9 aspect ratios.  
As the V-R151DP-AFHD monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are automatically  
scaled to fit the screen:  
In 4:3 mode, images are scaled up or down to fill the entire 4:3 screen (1024 x 768).  
In 16:9 mode, images are scaled to fill the maximum 16:9 portion of the screen (1024 x 576), with black bars filling  
the remainder of the screen.  
4:3 Mode  
16:9 Mode  
Note: The aspect ratio setting is ignored when Pixel-to-Pixelmode is enabled.  
Scanning Modes  
Use this setting to switch between normal and underscan modes:  
In normal scan mode, the active portion of the video signal is displayed on the screen, with 0% overscan.  
In underscan mode, area around the active video area is displayed on the screen, resulting in blanking intervals  
being shown around the perimeter of the active image. Use this mode to clearly view the edges of the active video  
area.  
Delay Modes  
Use this setting to enable one of three delay modes (H/V, H, V):  
In H/V delay mode, both horizontal sync and vertical sync are delayed, resulting in both horizontal and vertical  
blanking periods being shown on the screen.  
In V delay mode, vertical sync is delayed so that the vertical blanking period is displayed on screen.  
In H delay mode, horizontal sync is delayed so that the horizontal blanking period is displayed on the screen.  
Note: Delay modes are only available in normal scan mode.  
13  
 
On-Screen Menu (continued)  
SYSTEM CONFIGURATION SUBMENU  
Video Configuration Submenu  
Internal SMPTE Color Bars  
Use to display internally generated SMPTE split-field color bars.  
User-Definable Function Buttons  
Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor.  
The following options are available for each button:  
• DELAY  
• RATIO  
• BACK  
Enable and rotate amongst delay modes.  
Toggle between 4:3 and 16:9 aspect ratios.  
Rotate amongst marker backgrounds.  
• CENTER  
• MARKER  
• MONO  
• CTEMP  
• PTP  
Enable/disable center marker.  
Enable and rotate amongst marker settings (choices depend on aspect ratio setting).  
Enable/disable monochrome mode.  
Rotate amongst color temperature settings.  
Enable/disable Pixel-to-Pixelmode.  
FUNCTION 1 is set to RATIO by default.  
FUNCTION 2 is set to PTP by default.  
Status Display  
Use to enable on-screen display of input/format status in the upper-left corner of the screen.  
Saving and Loading User Configuration Presets  
Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. All  
monitor settings on the monitor are saved, including the image adjustment knob settings.  
Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded  
by selecting MFG. (Factory defaults cannot be overwritten.)  
Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.  
14  
 
Specifications  
PANEL  
TALLY  
Screen Size  
15.0” Diagonal  
3 LEDs (Green, Red, Yellow). Activation requires contact  
closure of pin to ground on the HD-15 connector:  
Display Area (h x v)  
Aspect Ratio  
Pixels  
Color Depth  
Viewing Angle  
Brightness  
Contrast Ratio  
Dot Pitch (h x v)  
Pixel Pitch (h x v)  
Pixel Response  
304.128 x 228.096 mm  
4:3 Native (4:3/16:9 Modes)  
1024 x RGB x 768  
16,777,216 Colors  
150° x 150°  
Pin No.  
1
2
Signal  
Green  
Red  
3
4
5
6
Yellow  
Ground  
Ground  
N/C  
500 cd/m2  
450:1  
0.099 x 0.297 mm  
0.297 x 0.297 mm  
25 ms (rise + fall)  
7
N/C  
8
N/C  
9
N/C  
10  
11  
12  
13  
14  
15  
N/C  
N/C  
N/C  
N/C  
Ground  
Ground  
VIDEO INPUT/OUTPUT  
Video Input / Output  
Supports SMPTE 170M, NTSC/PAL  
Color sub-carrier required  
ELECTRICAL  
Power Consumption 3A @ 12VDC (36 W)  
Voltage Requirement 12-14 VDC  
S-Video (Y/C) Input / Output  
Supports SMPTE 170M, NTSC/PAL  
V-PS12-5V-1 Power Supply:  
YPBPR Input / Output  
Input  
Output  
100V-240V, 50/60Hz  
12-14V, 5A  
Supports SMPTE 260M, 274M, 296M  
HD-SDI Input / Output  
Supports ITU-R BT.656, SMPTE 259M  
V-R151DP-AFHD supports SMPTE 292M  
MECHANICAL  
VGA Input  
Dimensions (w x h x d): 19.024” x 10.45” x 1.77”  
Supports RGBHV, RsGsBs, RGsB, RGB CS,  
Rack Height:  
6 RU  
Additional Mounting:  
VESA 75 mm  
(Desktop Stand Available  
DVI Input  
Supports Digital Signals Only (DVI-D)  
HDCP Supported  
Weight (Monitor Only): 8.1 lbs  
Operating Temperature 32°F to 120°F (0°C to 50°C)  
Storage Temperature  
-4°F to120°F (-20°C to 50°C)  
CONNECTORS  
Video Input  
Compliance  
, FCC-Class A, ANSI-63.4  
(Certificates on file)  
Video  
1 x BNC Female (75 Ω)  
1 x 4-Pin Mini-DIN  
3 x BNC Female (75 Ω)  
1 x BNC Female (75 Ω)  
1 x HD-15 Female  
RoHs  
Do not dispose. Return to  
Manufacturer or Authorized  
Recycle Facility.  
S-Video (Y/C)  
YPBPR  
HD-SDI  
VGA  
DVI  
1 x DVI-I 29-Pin Female  
Video Output (Active Loop-Through)  
Video  
S-Video (Y/C)  
YPBPR  
1 x BNC Female (75 Ω)  
1 x 4-Pin Mini-DIN  
3 x BNC Female (75 Ω)  
1 x BNC Female (75 Ω)  
SDI  
Power Input  
2-Pin Conxall Twist-Lock Female  
Tally Interface  
HD-15 Female  
15  
 
Specifications (continued)  
Maintenance  
Screen Cleaning  
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-  
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.  
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the  
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the  
screen to avoid damaging the LCD.  
Faceplate Dusting  
Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,  
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.  
Warranty  
Marshall Electronics warranties to the first consumer that this V-R151DP-AFSD/AFHD LCD monitor will, under normal  
use, be free from defects in workmanship and materials, when received in its original container, for a period of one year  
from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor  
the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to  
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not  
apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or  
construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the  
periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel  
failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any  
other person is authorized to make any warranties other than those described above, or to extend the duration of any  
warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve  
products and product features, specifications may change without notice.  
Marshall Electronics, Inc.  
1910 East Maple Ave.  
El Segundo, CA 90245  
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688  
16  
 

Kyocera Telescope KD135SX UPU User Manual
Lightolier Indoor Furnishings VRA1G8LS232 User Manual
Listen Technologies Network Card IS 6132P User Manual
Lowrance electronic Radar Detector RIM 300 User Manual
Mackie Speaker SR1521Z User Manual
Magic Chef Microwave Oven MCD775ST User Manual
Magnavox Flat Panel Television 42MF439B User Manual
Maytag Range 8113P424 60 User Manual
Meade Telescope DS 2102AT TC User Manual
Metra Electronics Fitness Electronics 71 7552 User Manual