Metra Electronics Automobile Accessories 99 9107B User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-9107B  
APPLICATIONS  
Audi A4 / S4  
2002-2008  
(With Symphony Radio)  
99-9107B  
KIT FEATURES  
• DIN Head Unit Provision with Pocket  
• ISO DIN Head Unit Provision with Pocket  
• Double DIN Head Unit Provision  
• Painted Matte Black to Match Factory  
KIT COMPONENTS  
• A) Radio Housing • B) Pocket • C) Trim Plate • D) ISO Brackets • E) Double DIN Trim Plate  
• F) Double DIN Brackets  
A
B
D
C
WIRING AND ANTENNA CONNECTIONS (Sold Separately)  
Harness:  
• 70-1787 - VW / Audi Harness 1993-up  
Antenna Adapter:  
• 40-VW10 - Euro Antenna Adapter 1986-up  
F
E
TOOLS REQUIRED:  
• (2) 86-9001 Head Unit Removal Tools • Small Flat Blade Screwdriver • Phillips Screwdriver  
1-800-221-0932  
© COPYRIGHT 2004-09 METRA ELECTRONICS CORPORATION  
 
DASH DISASSEMBLY  
99-9107B  
AUDI A4 / S4 2002-2008 W/SYMPHONY RADIO  
1
Disconnect the negative battery  
terminal to prevent an accidental  
short circuit.  
A
2
3
Insert Metra’s 86-9001 into the  
slots in the factory head unit and  
pull the unit out.  
(Figure A)  
CD  
AS  
LOAD  
FM  
MENU  
TONE  
AM  
Disconnect the wiring.  
SAT  
TAPE  
RDS  
SCAN  
1
 
KIT ASSEMBLY  
99-9107B  
DIN HEAD UNIT PROVISION WITH POCKET  
A
B
C
Snap the DIN cage into the Radio  
Housing and secure by bending  
the metal locking tabs down.  
(Figure A)  
1
2
Locate the factory wiring harness in  
the dash. Metra recommends using  
the proper mating adapter from  
Metra or AXXESS. Re-connect the  
negative battery terminal and test  
the unit for proper operation.  
Snap radio assembly into factory  
radio opening.  
3
4
5
Slide the aftermarket radio into the  
cage and secure. (Figure B)  
Snap the pocket into the Radio  
Housing until secure. (Figure C)  
NOTE: Once the dash kit is snapped  
in, it cannot be removed without  
dash panel removal  
2
 
KIT ASSEMBLY  
99-9107B  
ISO DIN HEAD UNIT PROVISION  
Mount the ISO Brackets to the  
head unit with the screws sup-  
plied with the unit. (Figure A)  
1
2
A
Slide the head unit into the radio  
opening until the slide clips  
engage. (Figure B)  
Snap the ISO Trim Plate into the  
Radio Housing. (Figure B)  
3
Snap the pocket into the Radio  
Housing. (Figure C)  
4
5
B
Locate the factory wiring harness  
in the dash. Metra recommends  
using the proper mating adapter  
from Metra or AXXESS. Re-con-  
nect the negative battery terminal  
and test the unit for proper opera-  
tion.  
Snap the radio assembly into the  
factory radio opening.  
6
C
NOTE: Once the dash kit is snapped  
in, it cannot be removed without  
dash panel removal  
3
 
KIT ASSEMBLY  
99-9107B  
DOUBLE DIN HEAD UNIT PROVISION  
Cut and remove center divider  
from radio housing. (Figure A)  
1
2
A
Snap the DDIN brackets to the  
inside edge of the radio housing.  
(Figure B)  
Slide the DDIN radio unit into the  
DDIN bracket/radio housing  
3
assembly and secure the unit to  
the kit using the screws supplied  
with the head unit. (Figure C)  
Snap the DDIN trim-plate onto the  
housing/radio assembly. (Figure C)  
4
5
B
Locate the factory wiring harness  
in the dash. Metra recommends  
using the proper mating adapter  
from Metra or AXXESS. Re-con-  
nect the negative battery terminal  
and test the unit for proper opera-  
tion.  
Snap radio assembly into factory  
6
radio opening.  
C
NOTE: Once the dash kit is snapped  
in, it cannot be removed without  
dash panel removal  
4
 
99-9107B  
NOTES  
5
 
99-9107B INSTRUCTIONS  
1-800-221-0932  
REV. 10/26/09  
© COPYRIGHT 2004-09 METRA ELECTRONICS CORPORA TION  
INST99-9107B  
 

La Crosse Technology Clock WT 8005U User Manual
LeapFrog Games MIND MANIA SPELLING CLIP User Manual
Linksys Network Card HPES03 User Manual
Lowrance electronic Stud Sensor EP 15 User Manual
Makita Power Screwdriver 6802BV User Manual
Marantz DVD Player DV6200 User Manual
Marshall Amplification Car Amplifier JTM45 User Manual
Maxxsonics Portable Speaker NKF116 User Manual
Maytag Dishwasher W10438305A User Manual
Melissa Coffeemaker 245 030 040 User Manual